Economizers have been increasingly required by energy code but many technicians have a set it and forget attitude about these devices. Sometimes they can be simple applications, but other times things can bite you.

This course will examine the following:

1. Technology Overview

2. Dry bulb vs. Enthalpy

3. IECC Code Requirements (including local law)

4. Typical Energy Savings

5. CO2-based Demand Controlled Ventilation (DCV)

6. Honeywell JADE Economizer Controller Wiring

7. Hands-on Setup and Configuration of JADE on the workbench

8. Overview of MicroMetl's Siemens Climatix-ECO Controller

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0009

NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Ht Pump Install, Ht Pump Service, Gas Heat Install, Gas Heat Service, Light Commercial Install, Light Commercial Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend A/C & Heat Pump 101 or have instructor approval to skip into this more advanced class.

This course will cover the fully variable R-454B & R-410A units, as well as the 5-stage R-410A units.

These units are very efficient under part load conditions and use variable speed inverter-driven scroll and rotary compressors. The intended audience of this particular class is installers and service technicians.

These units feature low turndown, high-efficiency, smooth start operation, and sound levels as low as 55dBA. The fully varaible units should be used with a communicating control.

This class will specifically cover:

• Proper application & installation 
• Configuration of Infinity/Evolution control
• Refrigerant charging procedure using controller
• Required maintenance
• Troubleshooting & Alarm Codes

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD or Elite Distributor" hours for the dealer.

NATE course ID# 8532-0016

NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Air to Air Heat Pump Install, Air to Air Heat Pump Service, Certified HVAC Professional, Efficiency Analyst Senior, Gas Heating (Air) Install, Gas Heating (Air) Service, HVAC Performance Verifier, Light Commercial Refrigeration Install, Light Commercial Refrigeration Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

This course includes classroom time for component familiarization and sequence of operation discussion followed by a hands-on training session. The lab work will include teardown and re-assembly of both non-condensing (80%) and condensing (90%+) furnaces, maintenance procedures, and basic component testing.

Please bring hand tools and electrical meter. Lunch will be provided.

This classes qualifies for 6 NATE hours for the technician plus 5 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0025

NATE credit received through this course is associated with the following specialties: A/C Installation, A/C Service, Air Distribution Install, Air Distribution Service, Heat Pump Install, Heat Pump Service, Gas Heating Install, Gas Heating Service, HVAC Performance Verifier

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

This course includes classroom time for component familiarization and sequence of operation discussion followed by a hands-on training session. The lab work will include teardown and re-assembly of both non-condensing (80%) and condensing (90%+) furnaces, maintenance procedures, and basic component testing.

Please bring hand tools and electrical meter. Lunch will be provided.

This classes qualifies for 6 NATE hours for the technician plus 5 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0025

NATE credit received through this course is associated with the following specialties: A/C Installation, A/C Service, Air Distribution Install, Air Distribution Service, Heat Pump Install, Heat Pump Service, Gas Heating Install, Gas Heating Service, HVAC Performance Verifier

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend A/C & Heat Pump 101 or have instructor approval to skip into this more advanced class.

This course will cover the fully variable R-454B & R-410A units, as well as the 5-stage R-410A units.

These units are very efficient under part load conditions and use variable speed inverter-driven scroll and rotary compressors. The intended audience of this particular class is installers and service technicians.

These units feature low turndown, high-efficiency, smooth start operation, and sound levels as low as 55dBA. The fully varaible units should be used with a communicating control.

This class will specifically cover:

• Proper application & installation 
• Configuration of Infinity/Evolution control
• Refrigerant charging procedure using controller
• Required maintenance
• Troubleshooting & Alarm Codes

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD or Elite Distributor" hours for the dealer.

NATE course ID# 8532-0016

NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Air to Air Heat Pump Install, Air to Air Heat Pump Service, Certified HVAC Professional, Efficiency Analyst Senior, Gas Heating (Air) Install, Gas Heating (Air) Service, HVAC Performance Verifier, Light Commercial Refrigeration Install, Light Commercial Refrigeration Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.