This class meets a half day per week for 9 weeks. Class size is limited to 15 due to the hands-on nature. Much of the time will be spent in our live-fire lab which includes furnaces, boilers, A/C, etc.

Please bring hand tools, electrical meter (volts and amps), digital dual-port manometer, and R-410a gauges to class each week.

Module 1 - ABCs of Comfort

Module 2 - Basic Electrical Troubleshooting - read wiring diagrams, use a volt meter, measure amperage

Module 3 - Furnace Component Break Down plus Clean & Check - furnaces in the lab will be disassembled and re-assembled then we utilize O&M manuals to properly clean furnaces and check safeties

Module 4 - Furnace Troubleshooting - how to use a manometer or mag gauge to measure pressure, troubleshooting with a voltmeter, reading error codes, adjusting airflow, etc.

Module 5 - Boiler Service - component identification, basic piping, and how to clean a boiler

Module 6 - A/C and Heat Pump Charging & Maintenance - basic operation and troubleshooting, using refrigerant gauges and superheat to check charge arrangement

Module 7 - Ecobee Smart Thermostats - install, setup, and programming

Module 8 - Ductless Mini-split Installation and Service

Module 9 - Indoor Air Quality (IAQ) Basics – Filtration, Evolution/Infinity air purifier, UV lights, PCO duct air purifiers, and bi-polar ionizers for functions, installation, and maintenance

Must attend at least 6 modules to earn 24 "FAD Distributor" or "Elite Distributor" hours.

Each module earns 4 NATE hours (except module 1) and credit can be awarded individually for each module. Note: smart stat module is only 3 NATE hours.

NATE course IDs:

Electrical #8532-0007

Furnace Clean #8532-0010

Furnace Service #8532-0003

Boiler #8532-0008

A/C & HP #8532-0001

Smart stats #8532-0017

Ductless #8532-0022

IAQ #8532-0012

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Details and registration for this class are at:

https://www.meanhvac.com/events/ 

*** Use discount code TEC50 to save $50 ***

This class qualifies for 16 "FAD Distributor" or "Elite Distributor" hours for the dealer. It also qualifies for 16 PDHs for PEs.

LIMITED - INVITE ONLY - LIMITED - INVITE ONLY - You must work for a Carrier/Bryant Factory Authorized Dealer (FAD) to register for this class.

This class is normally only taught in Indianapolis for $1,600 but is being offered this season in Melrose Park for $875 PLUS it also includes the $450 diagnostic tool. This is a limited time class price and tool inclusion.

This 3-day training course is only one portion of the requirements to become certified by Carrier or Bryant. There are also 4 online training modules, as well as as business requirements (signed agreement, insurance, brand loyalty, etc), and you must already be a Bryant or Carrier FAD.

Included: Handheld Midea/Carrier Ductless Diagnostic Service Tool ($450 value) and Lunch for 3 days

Ductless & Crossover Foundations:Installation & Start-up

In this course, participants will learn about the proper application, installation, startup, and basic troubleshooting of Ductless and Crossover Solutions. After completing this course, the participants will be able to: 

- Demonstrate an understanding of DLS technology, equipment and application​

- Interpret and apply installation instructions and installation techniques

- Demonstrate and apply accepted DLS best practices​

- Perform DLS system start up and commissioning

- Evaluate existing installations to avoid problems 

REQUIRED TOOLS: torque wrench, R-410A/R-454B flaring tool, reemer, pipe cutter, 2 adjustable wrenches, electrical meter with micro-leads, and basic hand-tools

This classes qualifies for 24 "FAD Distributor" hours for the dealer and 16 NATE hours for the technician

NATE course ID# 40239-0067

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

This course includes classroom time for component familiarization and sequence of operation discussion followed by a hands-on training session. The lab work will include teardown and re-assembly of both non-condensing (80%) and condensing (90%+) furnaces, maintenance procedures, and basic component testing.

Please bring hand tools and electrical meter. Lunch will be provided.

This classes qualifies for 6 NATE hours for the technician plus 5 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0025

NATE credit received through this course is associated with the following specialties: A/C Installation, A/C Service, Air Distribution Install, Air Distribution Service, Heat Pump Install, Heat Pump Service, Gas Heating Install, Gas Heating Service, HVAC Performance Verifier

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Details and registration for this class are at: https://www.eventbrite.com/e/duct-envelope-tightness-det-verifier-earn-8-bpi-8-nate-ce-libertyville-tickets-1210015832929

This classes qualifies for 8 NATE hours and 8 BPI hours for the technician plus 8 "FAD Distributor" or "Elite Distributor" hours for the dealer.

Details and registration for this class are at: https://www.eventbrite.com/e/advanced-combustion-safety-4-bpi-ceus-8-nate-ceus-melrose-park-il-tickets-1210022081619

This classes qualifies for 8 NATE hours and 4 BPI hours for the technician plus 8 "FAD Distributor" or "Elite Distributor" hours for the dealer.

This course includes classroom time for component familiarization and sequence of operation discussion followed by a hands-on training session. The lab work will include teardown and re-assembly of both non-condensing (80%) and condensing (90%+) furnaces, maintenance procedures, and basic component testing.

Please bring hand tools and electrical meter. Lunch will be provided.

This classes qualifies for 6 NATE hours for the technician plus 5 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0025

NATE credit received through this course is associated with the following specialties: A/C Installation, A/C Service, Air Distribution Install, Air Distribution Service, Heat Pump Install, Heat Pump Service, Gas Heating Install, Gas Heating Service, HVAC Performance Verifier

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.