Filter by Category
Our Classes
2-day Intro to HVAC for High Schoolers (hands-on) - North Aurora, IL
with Dave Herman
Ages: 14 - 18
Class meets MONDAY (July 27) & TUESDAY (July 28)
------------------------------------------------
Parental Waiver: By registering my teenager for this hands-on course, I acknowledge that they will be working with electricity, natural gas, refrigerant, and mechanical devices. Safety protocols will be followed and students will be supervised, but there is still a risk of injury.
------------------------------------------------
The focus of this class is for students to learn a little about the heating and air conditioning industry, some of the equipment used, and to have some fun learning how to braze with a torch.
Class size is limited to 20 students due to the hands-on nature. Much of the time will be spent in our live-fire lab. Please wear long pants and closed-toed shoes. Lunch is provided.
------------------------------------------------
By registering for this class, you are granting permission for TEC to utilize any photos or videos taken during the class for marketing future versions of this class to prospective attendees.
Residential Business Development Series - Melrose Park, IL
with J.P. Cadorin
This class is a six week course designed to help dealers become more profitable! Starting with a foundation of maintenance agreements, the class will go through how to properly price jobs, how to run your company as a BUSINESS, and how to increase sales and ultimately make more profit.
Agenda:
WEEK 1 - Maintenance Agreements
WEEK 2 - COGS vs Overhead
WEEK 3 - Flat Rate, Service, Labor Rate
WEEK 4 - In Home Sales
WEEK 5 - Work Utilization Board
WEEK 6 - Marketing
Instructors: Scott Vanderweil, J.P. Cadorin, Karie Johnson, Ryan Johnson
Carrier/Bryant/ICP Crossover Inverter Heat Pump Install & Service – NATE, FAD, Elite, & ComEd hrs - Melrose Park, IL
with Andy Sias
OVERVIEW:This training course provides the participants with an overview of Carrier/Bryant 37MU and Heil/Day&Night D5CU Crossover units which allow the usage of a horizontal discharge mini-split inverter with a standard furnace or air handler fan coil. The course will include installation requirements, operating characteristics and a general overview of service and troubleshooting procedures.
WHO SHOULD ATTEND:The target audience includes HVAC technicians and installers. Attendees should have a general understanding of air conditioning systems, refrigerants, installation and service procedures.
REQUIRED TOOLS: electrical meter with micro-leads and basic hand-tools
OUTLINE:
- Introduction of product (including models, capacities, voltages, etc.)
- Application of R-454B refrigerant
- Installation requirements and procedures
- Operating characteristics
- Fault codes
- Servicing and Diagnostic procedures
- Refrigerant piping lengths and charging procedures
- Installation wiring (standard thermostat or communicating)
This classes qualifies for 4 "FAD Distributor" or "Elite Distributor" hours for the dealer and 4 NATE hours for the technician
NATE course ID# 8532-0028, NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Air to Air Heat Pump Install, Air to Air Heat Pump Service, Certified HVAC Professional, Efficiency Analyst Senior, HVAC Performance Verifier, Light Commercial Refrigeration Install, Light Commercial Refrigeration Service, Low GWP Refrigerants
-------------------------------------------------------------------------------
CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class. Refunds are available (with a 15% processing fee) up to 72 hours before the start of class. You may also substitute a student from the same company (without penalty) at any time.
Will run
Duct & Envelope Tightness (DET) Certification (hands-on) - NATE, FAD, Elite, & BPI hrs - Libertyville, IL
with Joe Konopacki
Details and registration for this class are at: https://www.insightpsinc.com/bpi-building-analyst-training/#RequestForm
This classes qualifies for 8 NATE hours and 8 BPI hours for the technician plus 8 "FAD Distributor" or "Elite Distributor" hours for the dealer.
Advanced Combustion Safety (hands-on) - NATE, FAD, Elite, & BPI hrs - Melrose Park, IL
with Joe Konopacki
Details and registration for this class are at: https://www.insightpsinc.com/bpi-building-analyst-training/#RequestForm
This classes qualifies for 8 NATE hours and 4 BPI hours for the technician plus 8 "FAD Distributor" or "Elite Distributor" hours for the dealer.
Carrier Ductless Mini-split Installation & Service – NATE, FAD, & ComEd hrs - Melrose Park, IL
with Andy Sias
OVERVIEW:This training course provides the participants with an overview of 1-to-1 mini-split products including installation requirements, operating characteristics and a general overview of service and troubleshooting procedures.
WHO SHOULD ATTEND:The target audience includes HVAC technicians and installers. Attendees should have a general understanding of air conditioning systems, refrigerants, installation and service procedures.
REQUIRED TOOLS: electrical meter with micro-leads and basic hand-tools
OUTLINE:
- Introduction of product (including models, capacities, voltages, etc.)
- Application of R-454B refrigerant
- Installation requirements and procedures
- Operating characteristics
- Fault codes
- Servicing and Diagnostic procedures
- Refrigerant piping lengths and charging procedures
- Installation wiring
This classes qualifies for 4 "FAD Distributor" hours for the dealer and 4 NATE hours for the technician.
NATE course ID# 8532-0022, NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Ht Pump Install, Ht Pump Service, Certified HVAC Pro, Efficiency Analyst, Gas Heating Install, Gas Heating Service, HVAC Performance Verifier, Light Comm Refrig Install, Light Comm Refrig Service
-------------------------------------------------------------------------------
CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class. Refunds are available (with a 15% processing fee) up to 72 hours before the start of class. You may also substitute a student from the same company (without penalty) at any time.
Technical Development Program (TDP) - PDHs for PEs - Melrose Park, IL
with Ryan Hoger
This class meets for 3 to 4 hours per week for 11 weeks. The course is geared toward commercial building HVAC system designers, but all are welcome.
Topics include:
WEEK 1 - Concepts of Air Conditioning
WEEK 2 - Psychometrics & Refrigeration Cycle
WEEK 3 - Load Estimating
WEEK 4 - System Selection
WEEK 5 - Duct Design
WEEK 6 - Airside Equipment: RTUs, Air Handlers, Fan Coils
WEEK 7 - Water Piping & Pumps
WEEK 8 - Chiller Plants
WEEK 9 - Direct Digital Controls (DDC)
WEEK 10 - Indoor Air Quality & Filtration
WEEK 11 - Energy Recovery and Wrap-Up Topics
This class qualifies for up to (30) thirty hours of continuing education for Illinois and Wisconsin Professional Engineers. Students must attend 8 of the 11 sessions to receive a PDH certificate.
-------------------------------------------------------------------------------
CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class. Refunds are available (with a 15% processing fee) up to 72 hours before the start of class. You may also substitute a student from the same company (without penalty) at any time.
Residential HVAC Service Fundamentals (multi-week class, hands-on) - NATE, FAD, & Elite hrs - Melrose Park, IL
with Ryan Hoger
This class meets a half day per week for 9 weeks. Class size is limited to 15 due to the hands-on nature. Much of the time will be spent in our live-fire lab which includes furnaces, boilers, A/C, etc.
Please bring hand tools, electrical meter (volts and amps), digital dual-port manometer, and R-454b gauges to class each week.
Module 1 - ABCs of Comfort
Module 2 - Basic Electrical Troubleshooting - read wiring diagrams, use a volt meter, measure amperage
Module 3 - Furnace Component Break Down plus Clean & Check - furnaces in the lab will be disassembled and re-assembled then we utilize O&M manuals to properly clean furnaces and check safeties
Module 4 - Furnace Troubleshooting - how to use a manometer or mag gauge to measure pressure, troubleshooting with a voltmeter, reading error codes, adjusting airflow, etc.
Module 5 - Boiler Service - component identification, basic piping, and how to clean a boiler
Module 6 - A/C and Heat Pump Charging & Maintenance - basic operation and troubleshooting, using refrigerant gauges and superheat to check charge arrangement
Module 7 - Ecobee Smart Thermostats - install, setup, and programming
Module 8 - Ductless Mini-split Installation and Service
Module 9 - Indoor Air Quality (IAQ) Basics – Filtration, Evolution/Infinity air purifier, UV lights, PCO duct air purifiers, and bi-polar ionizers for functions, installation, and maintenance
Must attend at least 6 modules to earn 24 "FAD Distributor" or "Elite Distributor" hours.
Each module earns 4 NATE hours (except module 1) and credit can be awarded individually for each module. Note: smart stat module is only 3 NATE hours.
NATE course IDs:
Electrical #8532-0007
Furnace Clean #8532-0010
Furnace Service #8532-0003
Boiler #8532-0008
A/C & HP #8532-0001
Smart stats #8532-0017
Ductless #8532-0022
IAQ #8532-0012
-------------------------------------------------------------------------------
CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class. Refunds are available (with a 15% processing fee) up to 72 hours before the start of class. You may also substitute a student from the same company (without penalty) at any time.