OVERVIEW:This training course provides the participants with an overview of the GREE FLEXX condensing unit and heat pump models including installation requirements, operating characteristics and a general overview of setup procedures. These units can be used with any brand of furnace or fan coil, work with standard thermostats, and yet still vary the compressor speed.

WHO SHOULD ATTEND:The target audience includes HVAC technicians and installers. Attendees should have a general understanding of air conditioning systems, refrigerants, installation and service procedures.

This class qualifies for 3 NATE hours for the technician.

NATE course ID# 8532-0024, NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Ht Pump Install, Ht Pump Service, Gas Heating Install, Gas Heat Service, Air Distribution Service, Certified HVAC Pro, Efficiency Analyst Senior, HVAC Performance Verifier, Low GWP

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

This small group hands-on class will focus on the startup and service procedures of HTP high efficiency condensing boilers. The class is specific to HTP brands (Munchkin, Elite, Mod Con, Contender, Pioneer, etc.). The hands-on live fire portion will focus on the HTP Elite. There will be demonstrations of cleaning, inspection, controls, troubleshooting, and combustion testing.

This classes qualifies for 4 NATE hours for the technician.

NATE course ID# 8532-0011NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service, Hydronics Install, Hydronics Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.comwith your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend A/C & Heat Pump 101 or have instructor approval to skip into this more advanced class.

This course will cover the fully variable R-454B & R-410A units, as well as the 5-stage R-410A units.

These units are very efficient under part load conditions and use variable speed inverter-driven scroll and rotary compressors. The intended audience of this particular class is installers and service technicians.

These units feature low turndown, high-efficiency, smooth start operation, and sound levels as low as 55dBA. The fully varaible units should be used with a communicating control.

This class will specifically cover:

• Proper application & installation 
• Configuration of Infinity/Evolution control
• Refrigerant charging procedure using controller
• Required maintenance
• Troubleshooting & Alarm Codes

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD or Elite Distributor" hours for the dealer.

NATE course ID# 8532-0016

NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Air Distribution Install, Air Distribution Service, Air to Air Heat Pump Install, Air to Air Heat Pump Service, Certified HVAC Professional, Efficiency Analyst Senior, Gas Heating (Air) Install, Gas Heating (Air) Service, HVAC Performance Verifier, Light Commercial Refrigeration Install, Light Commercial Refrigeration Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Students MUST first attend Gas Furnace 101 or have instructor approval to skip into this more advanced class.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include start-up and troubleshooting procedures of residential gas furnaces. Students will be working on fully function systems in the lab area.

Please bring hand tools, volt or multi-meter, and manometer (or magnahelic).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0003

NATE credit received through this course is associated with the following specialties: Gas Heating Install, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

This course offers familiarization of the troubleshooting and installation manuals followed by a hands-on training session. The lab work will include maintenance, start-up, troubleshooting procedures of residential condensing units and heat pumps. Students will be working on fully function split systems in the lab area.

Please bring hand tools, volt or multi-meter, R-454B & R-410A refrigerant gauges, and pressure gauge (magnahelic or monometer).

This classes qualifies for 4 NATE hours for the technician plus 4 "FAD Distributor" or "Elite Distributor" hours for the dealer.

NATE course ID# 8532-0001, NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Ht Pump Install, Ht Pump Service, Gas Heating Service

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

LIMITED - INVITE ONLY - LIMITED - INVITE ONLY - You must work for a Carrier/Bryant Factory Authorized Dealer (FAD) to register for this class.

This class is normally only taught in Indianapolis for $1,600 but is being offered this season in Melrose Park for $875 PLUS it also includes the $450 diagnostic tool. This is a limited time class price and tool inclusion.

This 3-day training course is only one portion of the requirements to become certified by Carrier or Bryant. There are also 4 online training modules, as well as as business requirements (signed agreement, insurance, brand loyalty, etc), and you must already be a Bryant or Carrier FAD.

Included: Handheld Midea/Carrier Ductless Diagnostic Service Tool ($450 value) and Lunch for 3 days

Ductless & Crossover Foundations:Installation & Start-up

In this course, participants will learn about the proper application, installation, startup, and basic troubleshooting of Ductless and Crossover Solutions. After completing this course, the participants will be able to: 

- Demonstrate an understanding of DLS technology, equipment and application​

- Interpret and apply installation instructions and installation techniques

- Demonstrate and apply accepted DLS best practices​

- Perform DLS system start up and commissioning

- Evaluate existing installations to avoid problems 

REQUIRED TOOLS: torque wrench, R-410A/R-454B flaring tool, reemer, pipe cutter, 2 adjustable wrenches, electrical meter with micro-leads, and basic hand-tools

This classes qualifies for 24 "FAD Distributor" or "Elite Distributor" hours for the dealer and 16 NATE hours for the technician

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.

Join both of our "Hydronic Bills," Bill Bailey & Bill Shanel, as they guide you on the proper usage of a combustion analyzer to setup popular models of various condensing boilers.

This course is focused toward the understanding of combustion diagnostics and adjustments to improve efficiency, performance and reliability, as well as troubleshooting and diagnosis. Aspects of combustion from basic theory to verification of manufacturer’s specifications and flue gas diagnostics testing are covered. Measurement of oxygen, carbon dioxide, carbon monoxide, nitric oxides and sulfur oxides round out the dynamics of assuring efficient combustion. Controlling fuel, flame temperature, excess air and draft are detailed to maximize efficiency without sacrificing safety.

Bring your combustion analyzer with you to class for use in our lab. We will be working on HTP and IBC Condensing Boilers.

This classes qualifies for 4 NATE hours for the technician.

NATE course ID# 8532-0023, NATE credit received through this course is associated with the following specialties: A/C Install, A/C Service, Ht Pump Install, Ht Pump Service, Gas Heating Install, Gas Heating Service, Hydronics Gas Install, Hydronics Gas Service, Certified HVAC Pro, Efficiency Analyst Senior, HVAC Performance Verifier

-------------------------------------------------------------------------------

CANCELLATION POLICY - To cancel out of a class, please email ryan.hoger@tecmungo.com with your name and the date of the class.  Refunds are available (with a 15% processing fee) up to 72 hours before the start of class.  You may also substitute a student from the same company (without penalty) at any time.